• Monitor the pressure decay rate and indicate component pass or fail
  
• Very Cost Effective
  
• Pressure ranges from 0 to 15 bar
  
• Multiple test capability
  
• Real-time display of pressure decay
  
• Simple operation
  
• Programmable test parameters
  
• Uses include testing gearboxes, valves, moulded components, seals...
  
• Standard units and customer tailored units available
  

The Air Leak Detection Test Units operate by filling a cavity with compressed air until a predefined air pressure is detected

The supply air is then switched off and isolated.

After a settling period, the pressure will be measured and recorded

After a test time has elapsed the pressure is re-measured and compared with the first.

If the difference is greater than the set test limit, the test will have failed.

This failure can be fed into a machine PLC to indicate a failure and appropriate action can be taken.